Item: 7200 - SteelGard®
Description: Ambidextrous Liner
Sizes: XS, S, M, L, XL, XXL
Fabric Content: 38% Polyester, 36% Dynamax®HD, 26% Stainless Steel
Coating: Uncoated
Style/Pattern: Ambidextrous Liner
Cuff: Knitwrist
Color Coding:
Wrist Hem Color-Coding for Size:
XS - Yellow
S - Red
M - Blue
L - White
XL - Green
XXL - Brown
Packaging: 12 each per size per box
Cut Test Data: ANSI/ISEA 105-2016 Cut Level A9
Yarn Tensile Strength: 101 + 101 Newtons
Applications: SteelGard® liners provide the highest level of cut protection from knife blades that we can offer. These liners are knit with two yarns instead of one. This double strand construction provides a fail-safe: if one strand breaks, the second acts as a backup. There are two strands of spiral wrapped stainless steel in each core yarn for a total of four in each glove. SteelGard® gloves are designed for use in food processing operations where sharp blades are present, or in general industry where hands come in contact with sharp edges.
Information: SteelGard® gloves are 100% latex free. Taperfit® cuffs are extended length to protect the wrist area. These gloves contain AlphaSan® which prevents bacteria from growing both during and after glove use. SteelGard® gloves are made entirely of FDA accepted materials required by USDA for food use.
Cautions: SteelGard® gloves contain stainless steel, which can make the user potentially conductive in an electrical hazard situation. SteelGard® gloves should not be used in sheet glass applications since glass can cut stainless steel. These gloves are made with s synthetic yarn, so they should not be used near heat or open flame. SteelGard® gloves are designed to be worn underneath a cover glove. They should be edge-tested prior to approval for use.
Patents:
Country of Origin: Made in USA
Certifications:
Manufactured in an ISO 9002:2008 Certified facility
Banom.com | P.O. Box 687, Wayne, PA 19087 | P: 800 227-7694 | F: 800 456-8393