Item: 9305 - Apex®
Description: Palm Coated Knitwrist
Sizes: 5,6,7,8,9,10,11,12,13,14
Fabric Content: 74% Dynamax®52, 12% Pylex®, 8% Duralon®, 4% Spandex
Coating: Polyurethane
Style/Pattern: Palm Dip
Cuff: Knitwrist
Color Coding:
Wrist Color Coding:
5 - Purple
6 - Yellow
7 - Red
8 - Blue
9 - White
10 - Green
11 - Brown
12 - Orange
13 - Light Blue
14 - Grey

Wrist Hem Color: Green
Packaging: 12 pair per size per bag, 12 dozen per size per carton
Cut Test Data: ANSI/ISEA 105-2016 Cut Level A5
EN 388:2016: 4X43D
Tensile Strength: 129 Newtons
Applications: Apex® gloves are designed for use in handling sheet metal, glass, and knife blade applications
Information: These gloves are made with Dynamax®52, which combines tensile strength with a dulling action. The combination of high tensile strength and yarn hardness allows this product to resist the cutting edges of sheet metal, machined metal, glass and knife blades. The special palm coating is non-sticky so gloves can slide along paper stock being slit, and will resist sticking to nuts, bolts, or screws being driven with a power tool in assembly applications. These gloves feature extended length knitwrist cuffs to add protection to the wrist area where arteries, tendons, and nerves are vulnerable to sharp edges. The new Taperfit® wrist design allows a contoured fit without tightness or discomfort. These gloves may be reconditioned repeatedly using the Bantex® process. Gloves cleaned with this process are bacteria free and cosmetically acceptable for users to wear. The initial unit cost is reduced with each cycle of reuse. Apex® gloves are 100% latex free and treated with Sanifresh® to keep bacteria from growing both during and after glove use.
Cautions: Polyurethane coatings offer the most comfort and dexterity but provide the least abrasion and puncture resistance as compared to nitrile or latex coatings. These gloves are made with a synthetic yarn, so they should not be used near heat or open flame. Apex® gloves should be edge-tested prior to approval for use.
Country of Origin: Sri Lanka
Manufacturing facility has been certified by SGS to meet the following Standards:

- ISO 9001:2008   Quality Management System
- ISO 14001:2004  Environmental Management System
- OHSAS 18001:2007  OH&S Management System
- SA 8000:2008   Social Accountability Management System 
4X43D | P.O. Box 687, Wayne, PA 19087 | P: 800 227-7694 | F: 800 456-8393